Read Color Code Resistor. The old mnemonic was rather, well, disturbing, and a conscientious person would never recite it. The color information representing the resistance value can be read at once from any angle.
Resistor Color Code Chart How to Identify Resistance Color Coding from www.circuitstoday.com
We can read the resistance value according to the resistors color code because of the use of four color bands or five color bands or six color bands on the resistors to indicate the resistance value. The multiplier band goes by the same code and can be read as followed by n zeros, plus gold for divide by 10 and silver for divide by 100. Colors here is the table with the colors and numbers.
The Tolerance Band Is Usually Gold Or Silver In Colour And Is Placed A Little Further Away From The Other Bands.
The number a color represents depends on the band's position. Resistors with 4 band or 5 band are the most typical types. Colors of the bands will be brown, green, red and golden.
The Colors Used To Tolerances Are As Follows:
The reading direction might not always be clear. Digits from the first colors must be multiplied with the number of this color. This type of resistors is usually painted with three, four, five or six bands of different colors.
Here We Explain How To Indicate And Read Values With Color Code For Each Case Of A Wire Lead Resistor And A Chip Resistor.
So we are require to put the larger group on the left and start reading from left to right. The tolerance band is placed a little further away from the other bands, and its colour is generally gold or silver. Here are some points enlisted below to identify 1.
While Actually Measuring The Resistance Before Using It Is A Good Idea, It Is Also A Good Idea To Know What The Resistance Is Supposed To Be.
Watch this video to learn more about how to read a. How to read resistor color code direction june 17, 2022 colorpaints leave a comment how to read resistor color codes resistor color code how to memorize resistor color code resistor color code Values represented by colors and.
Brown ±1% Red ±2% Green ±0.5% Blue ±0.25% Violet ±0.1% Gray ±0.05% Gold ±5% Silver ±10% Since This Resistor Has A White Band At One End, You Would Start At That End Since It Is Not A Valid Band Color To Indicate Tolerance.
Therefore this resistor has a value of 984 ohms ±1%. As you can see they are: Wire lead resistors (→ leaded type) color codes/color bands on the body indicate “resistance value” and “tolerance”.
